TECNAN BLUE is a nano-ceramic protector for guns with bluing effect that creates a layer of maximum hardness and high resistance to corrosion, scratches, oils and solvents. It has been designed to repair and protect, in a durable way, the metal parts of any type of weapons: barrel, slide, body, cylinder, etc. It is compatible with steel, aluminium, stainless steel and alloys.
- Based on a dispersion of high hardness ceramic nanoparticles, providing maximum hardness and anti-corrosive properties.
- Room temperature curing, no heat is required. However, complete curing can be accelerated at temperatures of 140-150ºC for 1 hour.
- Protection from external agents such as weathering or other corrosive agents.
- Features: Nano-ceramic protector for guns with bluing effect that creates a layer of maximum hardness and high resistance to corrosion, scratches, oils and solvents. Available in a wide range of colours.
- Uses: It has been designed to be applied over the metal parts of weapons: barrel, slide, body, cylinder, etc. It is compatible with steel, aluminium, stainless steel and alloys.
- Available colours: matt black, colorless transparent, parker grey, metallic grey, olive green, laurel green, cobalt blue, wet sand, scarlet red; bone white.
- Yield:
- Aerosol: 1-2 standard size shotgun barrels.
- Liquid: 10-20m²/l.
- Standard packaging:
- Aerosol: 200ml
- Liquid: 250ml, 1L and 5L
- Great adhesion (0 (ISO 2409) / 5B (ASTM D3359).
- Years of durability and excellent coverage.
- Maximum hardness (9H – ISO 15184).
- High resistance to scratches, oils and solvents.
- Anticorrosion: Excellent protection against corrosion and weathering (>2.000 hours – 20 μm, metallic grey – ISO 9227).
- Coating Stability Max. Temp. (250ºC).
- Room temperature curing: 2-3 weeks or oven curing: 1 hour at 140-150ºC.
- Available in different colours and packaging.
- Easy application by spraying.
- Final coating thickness of 10-20 μm (microns) approximately.
- It is possible to re-apply the product and repair damaged areas, without having to remove previous coating remains.
- High resistance to UV radiation.
- Disassemble the firearm.
- Remove any trace of dirt, oxidation or corrosion:
-
- For surfaces with minor oxidation or corrosion, use a brass brush, brass steel or steel wool (medium or fine).
- For surfaces with more severe oxidation or corrosion, more abrasive mechanical means can be used, such as light sandblasting with aluminum oxide (100-120 grit) and a working pressure of 5.5 to 7 bars or suitable polishing brushes.
- Clean and degrease metal surfaces perfectly.
- Application: Apply evenly over the surface, avoiding overspray as far as possible.
-
- Aerosol: Spray over the surface at a distance of 25-35cm, keeping the container in a vertical or slightly inclined position.
- Spray gun/Airbrush: Spray evenly over the surface.
- Curing: At room temperature: Let it dry for a minimum of 4 hours. Full curing will be achieved in 2-3 weeks.
Oven: At 140-150ºC for 1 hour.
