TECNADIS MULTICOAT is a range of protective nano coatings, based on dispersions of ceramic nanoparticles, with non-stick, anti-corrosion and high hardness properties, available in different finishes. They prevent the deterioration of surfaces, either due to exposure to the elements (water, ice, humidity, rust, saltpetre, corrosion, UV radiation…), or that caused by human action (oils, grease, graffiti, scratches, stickers, urine…).
- Features: Nano protectors that prevent premature deterioration of metals, plastics and other surfaces thanks to their non-stick, anti-corrosion and high hardness properties.
- Uses: The protectors of the TECNADIS MULTICOAT range have been designed to be used in a wide variety of applications, such as:
- Industrial equipment: tanks, paint booths, capital goods, boilermaking, etc.
- Urban elements: lampposts, electrical panels, benches, litter bins, public toilets, canopies, fountains, MUPIS, signage, etc.
- Building elements: metal structures, façades, windows, doors, enclosures, etc.
- Vehicle components: cars, motorcycles, bikes, trains, boats, etc.
- Product range:
- TECNADIS MULTICOAT CLASSIC is a colourless non-stick ceramic nano protector that provides gloss and hardness, as well as facilitating surface cleaning. It has been designed to be applied to metallic, ceramic, plastic or painted surfaces.
- TECNADIS MULTICOAT ULTRAKER is a non-stick ceramic nano protector that provides hardness, as well as facilitating surface cleaning. This product is available in different colours, such as black or forge grey, among others, and can be applied to metals, ceramics and other surfaces.
- TECNADIS MULTICOAT ANTICORROSION (Primer & Finish) are two anti-corrosion ceramic nano protectors for metals exposed to C4 (highly aggressive) environments. This protection provides a metallic grey colour and can be applied directly to slightly oxidised surfaces. The difference between them is explained below:
3.1 Tecnadis Multicoat Anticorrosion (Primer): It is used as an anticorrosive primer in a solution made up of several layers of coatings.
3.2 Tecnadis Multicoat Anticorrosion (Finish): It is used as a last coat, without the need of primer application. In addition to protecting against corrosion, it provides non-stick properties.
- Average yield approx:
- TECNADIS MULTICOAT CLASSIC: 10-15m²/l.
- TECNADIS MULTICOAT ULTRAKER: 10-15m²/l.
- TECNADIS MULTICOAT ANTICORROSION (Primer & Finish): 8-10m²/l.
- Standard formats:
- Aerosol: 400ml.
- Liquid: 1L y 5L.
- Great non-stick power with easy-to-clean properties.
- High protection against graffiti, urine and adhesives.
- High resistance to corrosion: C4.
- It facilitates cleaning and maintenance.
- High hardness, 9H (ISO 15184).
- Great adhesion, 0 (ISO 2409) / 5B (ASTM D3359).
- High resistance to scratching, solvents and cleaning products.
- Easy application by spraying.
- High resistance to UV radiation.
- Room temperature curing: 1-2 weeks; or in oven: 1 hour at 120-130ºC.
- High durability.
- Remove any trace of dirt, oxidation or corrosion.
- Clean and degrease. The surface to be protected must be completely clean and dry before application.
- Application: Spray evenly over the surface until the desired finish is achieved. It is recommended to apply the product by means of a compressed air or electric gun, airless type, or automated systems.
- Dry-to-touch: 4 hours. Good performance after 24 hours.
- Full curing: 1-2 weeks. It is also possible to cure it completely in the oven: 120-130ºC for 1 hour.
