Tecnan Blue

Nano ceramic protector for guns with blueing effect (no heat required).

✔ Anticorrosion	✔ Maximum hardness	✔ High resistance
✔ Great adhesion	✔ Available in different colours	✔ Yield: 10-20 m²/l

TECNAN BLUE is a nanoceramic protector for guns with blueing effect that creates a hard and resistant ceramic coating. It was designed to repair and protect the metal parts of any type of weapons.

Based on a dispersion of high hardness ceramic nanoparticles, providing maximum hardness and anti-corrosion properties.
Room temperature curing, no heat is required. However, complete curing can be accelerated at temperatures of 140-150ºC for 1 hour.
Protection from external agents such as weathering or other corrosive agents.

It can be directly applied over the metal parts of guns: barrel, slide, body, cylinder, etc. It is compatible with steel, aluminium, stainless steel and alloys.

Product Information

Details

Maximum Adhesion: 0 (ISO 2409) and 5B (ASTM D3359).
It provides maximum hardness to the metal on which it is applied 9H (ISO 15184).
TECNAN BLUE is a protector with years of durability and excellent coverage.
Excellent protection against corrosion, oxidation and weathering > 2.000 h (ISO 9227) (Thickness 20μm - Metallic grey)
It works as a barrier, protecting the surface from corrosion and aggressive agents that can lead to serious deterioration.
Room temperature curing, no heat is required. However, complete curing can be accelerated at temperatures of 140-150ºC for 1 hour.
Resistant to scratches, oils and solvents.
High resistance to UV radiation.
Domestic and professional use. Easy application by aerosol or spray gun/airbrush.
One-component solution, no mixing required.
Available in different colours and formats.
Final coating thickness of 10-20 μm (microns), approximately.
It is possible to re-apply the product and repair damaged areas, without having to remove previous coating remains.

How to use

Details

Disassemble the gun.
Remove any trace of dirt, rust or corrosion:
- For surfaces with minor oxidation or corrosion: use a brass brush, brass steel or steel wool (medium or fine).
- For surfaces with more severe oxidation or corrosion, more abrasive mechanical means can be used, such as light sandblasting with aluminium oxide (100-120 grit) and working pressure of 5.5 to 7 bars or suitable polishing brushes.
Clean and degrease metal surfaces properly.
Application: Apply evenly over the surface, avoiding overspray as far as possible.
- Aerosol: Spray over the surface at a distance of 25-35cm, keeping the container in a vertical or slightly inclined position.
- Spray gun/Airbrush: Spray evenly over the surface.
Curing:
- At room temperature: Let it dry for at least 4 hours. Full curing is achieved in 2-3 weeks.
- Oven: 140-150°C for 1 hour.