Tecnadis Solidus
Consolidant for the restoration of porous building materials.
| ✔ Consolidant | ✔ Fully compatible with our range of hhydrophobic products | ✔ Yield: 2-10 m²/l |
| ✔ Ethyl silicate-based | ✔ Permeable to water vapour | ✔ Colourless |
TECNADIS SOLIDUS is a mono component ethyl silicate-based consolidating agent, developed for natural stone and other porous materials. This product consolidates the materials thanks to its easy penetration until reaching the healthy nucleus of the material, where it reacts with the ambient humidity and acts as binding substance.
This consolidant is specific for stone materials and is fully compatible with TECNAN’s range of hydrophobic solutions based on nanoparticles. It was designed to be applied on all types of absorbent mineral materials, which degrade easily due to atmospheric agents.
Product Information
- Consolidant, based on ethyl silicate, specifically designed for the restoration of natural stones and other absorbent mineral materials, which degrade easily due to atmospheric agents.
- Thanks to its high penetrating power, the product reaches the healthy core of the material, where it reacts with the ambient humidity and binds the material, thus consolidating the surface.
- Total drying, without formation of sticky substances.
- Complete impregnation, non-film forming and with good water vapour permeability.
- UV-stable mineral binder, which cannot be attacked by atmospheric agents.
- There are no chromatic alterations in the treated material, nor whitening on the surface, after complete consolidation reaction
- Fully compatible with TECNAN’s hydrophobic solutions based on nanoparticles..
How to use
- Surface preparation: Before application, surface must be completely clean and dry. It is recommended to apply it at a temperature between 10-25°C.
- Application: Shake the container vigorously. Apply the product by spraying at low pressure (0.5 bar maximum) or by immersion. The material must be completely saturated with the product to facilitate its penetration into the healthy nucleus of the material.
- Consolidation time: For optimal results, wait 4 weeks at room temperature of 20°C and a relative humidity of 40-50%.
Technical Information
Other Products
Applications
Otros productos
