Aquashield Ultimate
Nanotechnological water-repellent protector for porous building materials.
| ✔ Hydrophobic | ✔ Colourless | ✔ Solvent-based |
| ✔ Breathable | ✔ Yield: 3-8m²/l | ✔ Certified durability over 10 years |
AQUASHIELD ULTIMATE is the first hydrophobic product based on nanoparticles for porous building materials. The product has been developed to be used as a protector of natural stone facades (marble, slate, granite, limestone, sandstone). It is also suitable for protecting concrete and masonry, both in rehabilitation and new construction.
This is the solution that best fits the description of what a good protective treatment for the Restoration and Conservation of Historical and Artistic Heritage should be, and is therefore an excellent solution for Conservation and Restoration works.
Product Information
- Hydrophobic protector, based on nanoparticles, for porous building materialsIt was designed to protect facades and other vertical surfaces in areas with high rainfall or surfaces highly exposed to water, with the aim of delaying the appearance of any external agent produced by humidity (algae, moss, mould, etc.).
- Drying time, Optimum effect is achieved after a complete drying time of 24 hours.
- Excellent solution for rehabilitation and new construction with special application on bricks, mortars, monolayers, concrete, prefabricated, natural stone and mixed surfaces.
- It does not form film, does not seal, the microporosity of the substrate remains unchanged, allowing the breathability of the substrate.
- Certified durability over 10 years against rain.
- No chemical degradation over time due to its inorganic composition. No yellowing. No polymerisation reactions, catalysis, etc
- Totally resistant to UV radiation..
- Colourless, it does not alter aesthetic, texture or colour of the materials.
- Re-applicable, with no need to remove previous product remains. Easy handling and application.
- Thanks to its high water repellency, surfaces keep cleaner for longer.
How to use
- Surface preparation: Before application, surface must be completely clean and dry. Avoid the presence of fissures or cracks in the substrate.
- Application: Shake the container vigorously. Apply the product with a hand-held sprayer or a standard airless sprayer (low pressure), brush or roller. It is recommended to carry out two cross applications, and the second one can be applied on the substrate still wet.
- Drying time:Optimum effect is achieved after a complete drying time of 24 hours.
Technical Information
Applications
Other Products
