Aquapore Forte
Nanotechnological water-repellent protector for porous construction materials.
| ✔ Hydrophobic | ✔ Colourless | ✔ Water-based |
| ✔ Breathable | ✔ Yield: 3-8m²/l | ✔ Certified durability over 10 years |
AQUAPORE FORTE is a reinforced hydrophobic product based on nanoparticles dispersed in water for porous building materials. This protector can be used on all types of vertical surfaces (façades) with special application on bricks, mortars, monolayers, concrete, prefabricated, natural stone and mixed surfaces in which different materials and porosities are found, both in rehabilitation and new construction.
Eco-friendly solution. Due to its water-based composition is suitable for both indoor and outdoor works.
Product Information
- Hydrophobic protector, based on nanoparticles, for porous building materials . It was designed to protect facades and other vertical surfaces in areas with high rainfall or surfaces highly exposed to water, with the aim of delaying the appearance of any external agent produced by humidity (algae, moss, mould, etc.).
- Excellent solution for rehabilitation and new construction, with special application on bricks, mortars, monolayers, concrete, prefabricated, natural stone and mixed surfaces.
- It does not form film, does not seal, the microporosity of the substrate remains unchangedallowing the breathability of the substrate.
- Certified durability over 10 years against rain.
- No chemical degradation over time due to its inorganic composition. No yellowing. No polymerisation reactions, catalysis, etc.
- Totally resistant to UV radiation.
- Colorless, it does not alter aesthetic, texture or colour of the materials
- Re-applicable, with no need to remove previous product remains. Easy handling and application.
- Thanks to its high water repellencysurfaces keep cleaner for longer.
How to use
- Surface preparation: Before application, surface must be completely clean and dry. Avoid the presence of fissures or cracks in the substrate.
- Application: Shake the container vigorously. Apply the product with a hand-held sprayer or a standard airless sprayer (low pressure), brush or roller. It is recommended to carry out two cross applications, and the second one must be applied on the substrate still wet (wet-on-wet).
- Drying time: Optimum effect is achieved after a complete drying time of 48 hours.
Technical Information
Applications
Other Products
