Aquapore Active
| ✔ Water-repellent | ✔ Antimicrobial | ✔ Water-based |
| ✔ Breathable | ✔ Yield: 4-9 m²/l | ✔ Certified durability of over 10 years |
AQUAPORE ACTIVE is a water-based, nanoparticle-based, antimicrobial water repellent for porous materials. This protector is designed for all types of vertical walls (facades), with particular application on exposed brick, mortar, single-layer concrete, concrete, prefabricated structures, natural stone, and mixed surfaces where different materials and porosities are combined, both in renovations and new construction.
Sustainable treatment that reduces the proliferation of microorganisms and verdigris, delaying their growth.
Product information
- Antimicrobial, nanoparticle-based, water-repellent protector for porous construction materials. It has been designed to protect facades and other vertical surfaces in areas with high rainfall or surfaces highly exposed to water. This protects against the growth of microorganisms and mold, as well as delaying the appearance of any external agents caused by moisture.
- An excellent solution for renovations and new construction, with special application on exposed brick, mortar, single-layer concrete, concrete, prefabricated structures, natural stone, and mixed surfaces.
- It does not form a layer, film, or seal; the microporosity of the substrate remains unchanged, allowing the materials to breathe.
- Water-repellent protection for more than 10 years (against the action of rain).
- It does not degrade chemically over time due to its inorganic composition. It does not yellow. It does not undergo polymerization, catalysis, or other reactions.
- Completely UV resistant.
- Colorless, does not alter the appearance, texture, or color of the materials.
- Re-applyable, without having to remove previous product residue. Easy handling and application.
- Thanks to its high water repellency, it keeps surfaces clean for longer.
Instructions for use
- Substrate preparation: Before applying, the surface must be completely clean and dry. Avoid any cracks or fissures in the substrate.
- Application: Shake the container vigorously. Apply the product using a sprayer or air gun (standard low-pressure airless spray), brush, or roller. It is recommended to apply two crisscross applications, applying the second application to the still-wet substrate (wet-on-wet).
- Drying time: The optimal effect is achieved after a drying time of 48 hours.
Technical Information
Applications
Other products
